Lose bolts inside the engine !?

Toutes les questions sur la partie moteur...
Répondre
jellevda
Niveau 1
Niveau 1
Messages : 10
Enregistré le : lun. 30 oct. 2017 16:08

Lose bolts inside the engine !?

Message par jellevda »

Bonjour a tous !
I wanted to change the oil of my newly purchased bike and found a lot of metal inside ::cryhappy: ::cryhappy: ::non:
Took off the bottom plate and the cilinder and head. No damage was found. But i'm curious about the bolt on the picture below .. did this come of somewhere or did it manage to get in the engine by accident ? ::marteau:
I checked every exploded view and repair manual a few times but didn't found anything :/
It's a M4

It's a 125cc eninge from the z'series (1956)

Image

Friendly greetings

Program
Niveau 2
Niveau 2
Messages : 50
Enregistré le : ven. 27 oct. 2017 16:01

Re: Lose bolts inside the engine !?

Message par Program »

Never see square bolt in this motor ::sceptique:

Avatar du membre
zub
Administrateur
Administrateur
Messages : 1508
Enregistré le : sam. 27 févr. 2010 14:08
Vos motos : U54C 1955, Z46C 1948, Remorque Fulgur M100 luxe
Localisation : 59
Contact :

Re: Lose bolts inside the engine !?

Message par zub »

hi,

for the square bolt, I do not see where it can come from ???
for the other, is not it an engine foundry waste?

------------------------------------------------------------------------

pour le boulon carré, je ne vois d'ou cela peut venir ???
pour l'autre, n'est ce pas un dechet de fonderie du moteur ??

Répondre