Z27c or not !?

Les autres discussions...
Répondre
jellevda
Niveau 1
Niveau 1
Messages : 10
Enregistré le : lun. 30 oct. 2017 16:08

Z27c or not !?

Message par jellevda »

Hello everyone !
I'm pretty new on this forum since i just purchased a motobecane
(I gonna write in english cause my french is even worse::( )<br>
Since i've been reading on this site my doubts and feeling of the unknown are getting bigger..
Who can tell me more about my bike ::roi:
So far what i know ..
It says mobyserie 57 on the sides
On the cilinder there is a 175cc marking
But when i registerd it to get a license plate the computer at the office said it was an 125cc ..
But they could be wrong because of the age.
Here are some pictures of evident markings for you guys .
Ps . The number on my vin plate and engine are not the same ? So this isn't the right/original engine ?
I hope someone can clear everything out for me ::(
Image
Image
Image

Image

Program
Niveau 2
Niveau 2
Messages : 50
Enregistré le : ven. 27 oct. 2017 16:01

Re: Z27c or not !?

Message par Program »

Hi , i think it's z57c 125cc,
http://www.motoconfort-u54c.com/page.php?137
Follow this link, this one should help you
Have fun with tour french bike ::thup:

jellevda
Niveau 1
Niveau 1
Messages : 10
Enregistré le : lun. 30 oct. 2017 16:08

Re: Z27c or not !?

Message par jellevda »

Thanx for the answer ! I allready found that link. Thats whay made me doubt my bike ::marteau:
If i look at the numbers and the z*6c type on my vin- plate i looks more like i own a z56c 125cc bike with a bigger engine ::mefie:
And i think the coloring could never be original ?

Program
Niveau 2
Niveau 2
Messages : 50
Enregistré le : ven. 27 oct. 2017 16:01

Re: Z27c or not !?

Message par Program »

For be sure, you can count engin cooling blades , if you find 8 engin cooling blades on cylindre , it's 125, if there are 11 engin cooling blades it's 175

jellevda
Niveau 1
Niveau 1
Messages : 10
Enregistré le : lun. 30 oct. 2017 16:08

Re: Z27c or not !?

Message par jellevda »

Thanx for the help.
The engine is an 175cc no about that .
But maybe they put it in a 125cc frame .
From my findings on the site the frames are the same. ::thup:
I don't know if you can see the photos ?
The engine number on the vin plate and engine are different . They have to be the same ?
Also the type is z 6c and i can't find the right type .
I was reading every shopmanual so far ::( ::cryhappy:
The chassis number is 823010 and if i check in on the 175 and 125 sheet i don't know for sure.

I'm sorry being so difficult ! ::mefie:

jellevda
Niveau 1
Niveau 1
Messages : 10
Enregistré le : lun. 30 oct. 2017 16:08

Re: Z27c or not !?

Message par jellevda »

My excuses till the 1000 and a lot of shame !
The engine is indeed an 125 cc ! But still nog sure of the type then ..
The color is never delivered like the photos above i guess ?

Avatar du membre
zub
Administrateur
Administrateur
Messages : 1508
Enregistré le : sam. 27 févr. 2010 14:08
Vos motos : U54C 1955, Z46C 1948, Remorque Fulgur M100 luxe
Localisation : 59
Contact :

Re: Z27c or not !?

Message par zub »

Did you check on the reinforcement of the triple crown to check if the struck frame number matches the plate?

Répondre